INFO@CMT.GMBH
+49-2332-5510500
NO MINIMUM ORDER VALUE
WORLDWIDE SHIPPING
Go to homepage
Wishlist
Shopping cart €0.00

Linear Rolling Guidance Systems

Rolling Bearings

Rod Ends, Spherical Plain Bearings

Freewheels, Backstops

Bearing Housings

Bearing Units

Locknuts, Sleeves

Shaft Couplings

Locking Assemblies

Drive Chains, Conveyor Chains

Drive Belts, Conveyor Belts

Special Parts

Filter products

B71915-E-T-P4S-UL
B71915-E-T-P4S-UL
Bore diameter: 75 | Outer diameter: 105 | Width: 16 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€242.12
B71916-C-T-P4S-UL
B71916-C-T-P4S-UL
Bore diameter: 80 | Outer diameter: 110 | Width: 16 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€260.30
B71916-E-T-P4S-UL
B71916-E-T-P4S-UL
Bore diameter: 80 | Outer diameter: 110 | Width: 16 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€260.30
B71917-C-T-P4S-UL
B71917-C-T-P4S-UL
Bore diameter: 85 | Outer diameter: 120 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€287.76
B71917-E-T-P4S-UL
B71917-E-T-P4S-UL
Bore diameter: 85 | Outer diameter: 120 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€287.76
B71918-C-T-P4S-UL
B71918-C-T-P4S-UL
Bore diameter: 90 | Outer diameter: 125 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€324.12
B71918-E-T-P4S-UL
B71918-E-T-P4S-UL
Bore diameter: 90 | Outer diameter: 125 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€324.12
B71919-C-T-P4S-UL
B71919-C-T-P4S-UL
Bore diameter: 95 | Outer diameter: 130 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€355.44
B71919-E-T-P4S-UL
B71919-E-T-P4S-UL
Bore diameter: 95 | Outer diameter: 130 | Width: 18 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€355.44
B71920-C-T-P4S-UL
B71920-C-T-P4S-UL
Bore diameter: 100 | Outer diameter: 140 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€386.77
B71920-E-T-P4S-UL
B71920-E-T-P4S-UL
Bore diameter: 100 | Outer diameter: 140 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€386.77
B71921-C-T-P4S-UL
B71921-C-T-P4S-UL
Bore diameter: 105 | Outer diameter: 145 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€502.04
B71921-E-T-P4S-UL
B71921-E-T-P4S-UL
Bore diameter: 105 | Outer diameter: 145 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€502.04
B71922-C-T-P4S-UL
B71922-C-T-P4S-UL
Bore diameter: 110 | Outer diameter: 150 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€563.93
B71922-E-T-P4S-UL
B71922-E-T-P4S-UL
Bore diameter: 110 | Outer diameter: 150 | Width: 20 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€563.93
B71924-C-T-P4S-UL
B71924-C-T-P4S-UL
Bore diameter: 120 | Outer diameter: 165 | Width: 22 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€658.28
B71924-E-T-P4S-UL
B71924-E-T-P4S-UL
Bore diameter: 120 | Outer diameter: 165 | Width: 22 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€658.28
B71926-C-T-P4S-UL
B71926-C-T-P4S-UL
Bore diameter: 130 | Outer diameter: 180 | Width: 24 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€745.71
B71926-E-T-P4S-UL
B71926-E-T-P4S-UL
Bore diameter: 130 | Outer diameter: 180 | Width: 24 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€745.71
B71928-C-T-P4S-UL
B71928-C-T-P4S-UL
Bore diameter: 140 | Outer diameter: 190 | Width: 24 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€841.62
B71928-E-T-P4S-UL
B71928-E-T-P4S-UL
Bore diameter: 140 | Outer diameter: 190 | Width: 24 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€841.62
B71930-C-T-P4S-UL
B71930-C-T-P4S-UL
Bore diameter: 150 | Outer diameter: 210 | Width: 28 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€928.27
B71930-E-T-P4S-UL
B71930-E-T-P4S-UL
Bore diameter: 150 | Outer diameter: 210 | Width: 28 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€928.27
B71932-C-T-P4S-UL
B71932-C-T-P4S-UL
Bore diameter: 160 | Outer diameter: 220 | Width: 28 | Cage: polyamide, hard fabric | Material: standard
Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€1,171.15
This website uses cookies to ensure the best experience possible. More information...