32007-X-H
Product information "32007-X-H"
| Bore diameter: | 35 |
|---|---|
| Outer diameter: | 62 |
| Width: | 18 |
| Cage: | steel cage |
| Material: | standard |
Similar products
Product number:
1040575
Manufacturer:
FAG
Weight:
0.23 kg
Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Skip product gallery
GFRN12 - GLP12
Regular price:
€193.60
Roller type freewheel GLP.. (basic unit to be mounted with covers), two ball bearings of series 160.. supported, one keyway on the inner ring, one keyway and threated holes on outer ring, incl. flat seals, CTS
Sold out
RNAO45X62X40-ZW-ASR1-XL
Double row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, with lubrication hole, INA
Price on request
Sold out
FGL3062-EEM-SW
Regular price:
€174.62
Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella
Sold out
GCR62-EE-SW
Regular price:
€279.75
Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, with plastic seals, incl. lock washer and nut, Nadella
Sold out
GCU62
Full complement single row track roller GCU.. with threaded stud, with profiled outer ring, concentric, without seals, incl. lock washer and nut, Nadella
Price on request
Sold out
PK62-C-NX-V
Regular price:
€491.16
Corrosion-resistant guide roller PK.. with tapered roller bearing, track roller, concentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella
Sold out
FGUL3062
Full complement single row track roller FGUL.. without pin, light series, with cylindrical outer ring, non-separable, without seals, Nadella
Price on request
Sold out
32007-X-XL
Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Price on request
Sold out
R065815774
Regular price:
€33.14
Compact ball bushing KBC-50-D-RT-G, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, with grease, Rexroth
Sold out
RKX62-C-NX
Regular price:
€528.66
Corrosion-resistant guide roller RKX.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella
Sold out
R067005600
Regular price:
€98.45
Super linear bushing KBA-40-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth
Sold out
R067225640
Regular price:
€102.10
Super linear bushing KBB-40-DD-RT without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with two integrated wiper seals, Rexroth
Sold out
R065054000
Regular price:
€204.48
Standard linear bushing KBMT-40-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, POM guide cage, with two integrated wiper seals, ungreased, Rexroth
Sold out
R073014076
Regular price:
€215.78
Super linear bushing KBSH-40-D for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth