3201-2RS

€23.48

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1065047

Manufacturer: INA

EAN: 4054365727856

Weight: 0.06 kg

Product information "3201-2RS"

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with steel cage, seals on both sides, INA

Bore diameter:	12
Outer diameter:	32
Width:	15,9
Sealing:	seals on both sides
Cage:	steel cage
Bearing clearance:	CN (normal)
Material:	standard

Similar products

WLK12-00-500

Heavy-duty spherical bearing WLK.. with integral self-aligning ball bearing, full complement design, with long-term greasing and shields on both sides, Durbal

€83.22

Sold out

R067112076

Super linear bushing KBA-O-20-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€42.23

Details

NA2201-X-2RSR

Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with cylindrical outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€33.65

NB243220

Needle roller bearing with double-side ribs, single row, without inner ring, with lubrication groove an bore, NRB

€4.65

NATV12

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, without seals, IDC

€23.03

PAP2830-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€417.92

Sold out

BRTM16-90-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€207.11

Details

HF2520-L564

Drawn cup roller clutch HF.. without bearing support, one-way clutches, plastic springs (KF), knurled outer surface, without sealing, to combine with drawn cup needle roller bearings HK and BK, INA

€16.67

IR28X32X30-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€10.29

Sold out

FRR32-AZ

Guide roller FRR..AZ, special rollers, pin with through-hole in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

BEFN12-20-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€24.01

Sold out

R074122530

Standard linear bushing KBMFT-25-DD-NR, tandem with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€416.91

Details

R060202010

Standard linear bushing KBM-20-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€37.42

LR200-X-2RSR>A

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with cylindrical outer surface, with plastic cage, lip seals on both sides, INA

Price on request

Sold out

7201-B-XL-JP-UA

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€23.44

Details