51104

€8.00

Ready for dispatch within 3-5 working days: 554

Product number: 1041166

Manufacturer: FAG

EAN: 4012801016353

Weight: 0.04 kg

Product information "51104"

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

Bore diameter:	20
Outer diameter:	35
Height:	10
Cage:	steel cage
Material:	standard

Similar products

NUKR35-A

Stud type track roller NUKR.., solid roller pin, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€49.03

Sold out

LR7

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€74.36

Details

RNAO25X35X26

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€21.53

NATV15

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, without seals, IDC

€24.59

16003-A-C3

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.65

LFR5201-10-2RS-RB

Corrosion-resistant locating bearing track roller LFR5.., profiled track rollers, double row angular contact ball bearing with gothic profiled groove in outer ring - 2-point contact, with plastic cage and seals on both sides, INA

€37.95

KRV35-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€46.63

CLK250L 22x35

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€16.76

LS2035

Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA

€3.00

ASNU8 - USNU8

Built-in roller freewheel USNU.., dimensions according to ball bearing 63.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€81.84

3003-2RS

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€21.86

Sold out

RNA1017

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), without lubrication hole and groove, Nadella

€45.11

Details

AS2035

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€0.52

RAL35.10

Floating guide roller RAL.., with double row ball bearing, version with "gothic arch" profile, concentric, with ZZ shields on both sides, incl. lock washer and nut, Nadella

€67.23

NJ202-E-XL-TVP2-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€19.91