6307-2RSR-C3

Bore diameter:	35
Outer diameter:	80
Width:	21
Sealing:	seals on both sides
Cage:	steel cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

6208-2Z-C3

Single row deep groove ball bearing 62.., radial, with steel cage and sheet steel shields on both sides, FAG

€8.17

PAP7560-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€16,744.65

Sold out

QJ307-XL-MPA-T42A

Four-point contact bearing QJ3.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€70.74

Details

Sold out

61911-2RZ-C3

Single row deep groove ball bearing 619.., radial, with steel cage and non-contact seals on both sides, FAG

€40.42

Details

PAP7580-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€50,186.18

NUP2208-E-XL-M1

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€98.59

Sold out

7208-B-XL-JP-UA

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€40.95

Details

PAP7560-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€100.02

Sold out

LFE19

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€238.65

Details

Sold out

NJ208-E-XL-M1A-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€72.30

Details

7307-B-XL-TVP-UO

Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€37.26

PAP7550-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€134.32

NCF2208-V-C3

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€75.68

NU210-E-XL-M1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€93.50

7208-B-XL-MP

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€41.89

Product information "6307-2RSR-C3"