CLK132 20x47

€14.78

Ready for dispatch within 3-5 working days: 812

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065840

Manufacturer: CMT Line

Weight: 0.3 kg

Product information "CLK132 20x47"

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

Bore diameter:	20
Outer diameter:	47
Width:	28
Thread size:	M6
T (Nm):	410
F (kN):	41
Material:	standard

Alternative articles to "CLK132 20x47"*

Ringfeder - RfN 7013.0
Bikon - Bikon 1003
Tollok - TLK 132
KTR - KTR 203
Ringspann - RLK 132

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

GR6-700-D-AA6-40

Linear unit GR6..-AA6.., cross roller guideways, two 700mm long guide rails and roller cage made of steel sheet with 40 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€712.11

Sold out

KRE47-PP-A-NMT

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€85.21

Details

NSDA35-Y-3-2RS-B

NSDA-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), for mounting parallel to the load direction - configuration B, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€402.52

Sold out

NSD35-5-2Z-A

NSD-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2Z shielded, for use in T- and U-rails, Rollon

€305.90

Details

V6-100

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€92.67

Sold out

CDW35-100-2Z-A-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three prismatic roller bearings -2Z shielded, for use in T-rails, Rollon

€196.27

Details

Sold out

NSD43-3-2RS-B

NSD-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€264.70

Details

V6-500

€466.40

Sold out

CDW35-100-2Z-B-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2Z shielded, for use in T-rails, Rollon

€196.27

Details

Sold out

CSW35-120-2Z-A-T

Slider type CSW, Compact Rail linear guides, zinc-plated steel body with four prismatic rollers -2Z shielded, in configuration A, WT wipers on both ends, for use in T-rails, Rollon

€205.58

Details

M6-450

Single slide rail M6.., linear sliding guideways, made of special alloy steel, 90° M-profile, running surfaces coated with antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€414.62

Sold out

CDW35-150-2Z-A-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2Z shielded, for use in T-rails, Rollon

€285.15

Details

TLC35-0640

Fixed bearing rail TLC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€163.52

MV6-400

Linear unit MV6.., linear sliding guideways, made of special alloy steel, with 90° profile, M6 guide rail running surfaces coated with antifriction material, smooth V6 guide rail, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€710.14

Sold out

CDW35-150-2Z-B-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five prismatic roller bearings -2Z shielded, for use in T-rails, Rollon

€285.15

Details