CLK139 25x47

€26.56

Ready for immediate despatch: 4

Ready for dispatch within 3-5 working days: 475

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1062208

Manufacturer: CMT Line

Weight: 0.2 kg

Product information "CLK139 25x47"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	25
Outer diameter:	47
Width:	18
Thread size:	M6
T (Nm):	380
F (kN):	36
Material:	standard

Alternative articles to "CLK139 25x47"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

KR16-X

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, INA

€28.99

NSDA43-5-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€340.81

R067223040

Super linear bushing KBB-30-DD without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€61.64

Sold out

CSW35-120-2RS-A-T

Slider type CSW, Compact Rail linear guides, zinc-plated steel body with four prismatic rollers -2RS sealed, in configuration A, WT wipers on both ends, for use in T-rails, Rollon

€234.08

Details

GR6-300-D-AA6-17

Linear unit GR6..-AA6.., cross roller guideways, two 300mm long guide rails and roller cage made of steel sheet with 17 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€301.04

Sold out

KRVE16-PP-A-NMT

Stud type track roller KRVE.. with eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€40.93

Details

NSDA43-3-2RS-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€264.96

DSAL06-E

Standard rod end DSAL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, male left hand thread, zinc plated, relubricatable, Durbal

€5.48

TLC35-1360

Fixed bearing rail TLC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€346.51

6303-C-C3>V

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€2.92

Sold out

CDW35-100-2RS-A-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three prismatic roller bearings -2RS sealed, without wipers, for use in T-rails, Rollon

€218.13

Details

DGE30-HO-2RS

Radial spherical-plain bearing DGE..-HO, sliding combination steel-steel, phosphated, outer ring with single split, with lip seals on both sides, relubricatable, Durbal

€8.35

TLC35-2640

€644.45

3204-BD-XL-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€21.13

Sold out

CDW35-150-2RS-A-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2RS sealed, without wipers, for use in T-rails, Rollon

€318.32

Details