CLK139 90x125

€85.20

Ready for dispatch within 3-5 working days: 18

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066576

Manufacturer: CMT Line

Weight: 2.3 kg

Product information "CLK139 90x125"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	90
Outer diameter:	125
Width:	35
Thread size:	M10
T (Nm):	5800
F (kN):	180
Material:	standard

Alternative articles to "CLK139 90x125"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

HMVC 12E

Hydraulic nut HMVC..E, for mounting and dismounting rolling bearings with tapered bore, inch thread, incl. accessories, BGL

€875.16

Details

CLK132 85x125

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€69.00

V12-200

Single slide rail V12.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€286.81

BEF10-41-502

Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female left hand thread, tight clearance, Durbal

€29.31

QJ214-XL-TVP

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with polyamide cage, open design, FAG

€98.96

61820-Y-C4

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€85.52

Sold out

T4PFV50.25.300

Carriage T4PFV.. with anodized aluminum body, four ball bearing guide rollers with "gothic arch" profile, suitable for DC rails, Nadella

€669.99

Details

Sold out

USPA205

Self aligning bearing unit with radial insert ball bearing US2.. with socket set screws and shielded on both sides, pillow block PA2.. made of cast, SNR

€20.29

Details

GE70-XL-KTT-B

Radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, triple lip seals on both sides, with plastic cage, relubricatable, INA

€141.50

BRF10-00-501

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€44.70

33016

Tapered roller bearing 330.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€69.80

SL024918-A

Double row cylindrical roller bearing SL0249.. with full complement, non-locating bearing, three fixed ribs on inner ring, outer ring without ribs, locking ring between rows of rolling elements, INA

€188.36

Sold out

CLK139 95x130

€99.20

Details

MV12-1200

Linear unit MV12.., linear sliding guideways, made of special alloy steel, with 90° profile, M12 guide rail running surfaces coated with antifriction material, smooth V12 guide rail, mounting holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€3,533.03

C208-R-INOX-2RS

Corrosion-resistant profiled guide roller C..-2RS with pin, double row bearing, concentric, seals on both sides, incl. lock washer and nuts, CTS

€43.90