CLK350 6x16

Bore diameter:	6
Outer diameter:	16
Width:	11
Thread size:	M2,5
T (Nm):	6
F (kN):	2
Material:	standard

GCL16-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€58.55

Sold out

R060000830

Standard linear bushing KBM-8-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, guide cage made of PA/POM, without sealing rings, ungreased, Rexroth

€42.91

Details

IR12X16X22-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€5.51

RSTO5-TV

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€8.43

KRV16

Stud type track roller KRV.. without eccentric, solid roller pin, with axial guidance, outer ring with crowning profile R500, full complement, gap seals on both sides, INA

€26.53

Sold out

R061130810

Standard linear bushing KBM-E-8-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, guide cage made of PA/POM, with wiper seal on one side, ungreased, Rexroth

€23.04

Details

PAP1415-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€849.03

PAP1425-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

PAP1420-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€411.12

PAP1425-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€766.84

DPHSL05

Standard rod end DPHSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€5.40

PAP1420-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€671.58

KR16-SK

Track roller with solid roller stud, with cage-guided needles, outer ring with crowned profile R500, with hexagon socket, without seals, IDC

€23.61

PAF14120-P180 - 5000x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€4,464.53

NATV5-PP

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

€13.89

Ringfeder - RfN 7061
Tollok - TLK 350
KTR - KTR 105
Ringspann - RLK 350

Product information "CLK350 6x16"