EFN12-21-501

€22.79

Ready for immediate despatch: 3

Product number: 1002709

Manufacturer: Durbal

Weight: 0.1 kg

Product information "EFN12-21-501"

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, fine female right hand thread, zinc plated, relubricatable, Durbal

Bore diameter:	12
Outer diameter:	32
Width:	10
Height:	66
Thread type:	female thread right
Thread size:	M12x1,25
Material:	standard

Alternative articles to "EFN12-21-501"*

EI12 M12x1,25
GIR12-DO M12x1,25

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Heavy-Duty Rod Ends EFN - Classic Line - Durbal
Rod Ends & Spherical-Plain Bearings - Durbal - Product Catalogue

Similar products

3201-BB-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, open design with plastic cage, FAG

€19.56

AS12 - US12

Built-in roller freewheel US.., dimensions according to ball bearing 62.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€64.49

KBS20

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€32.76

Sold out

RNA1015

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), without lubrication hole and groove, Nadella

€45.11

Details

3201-2RS

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with steel cage, seals on both sides, INA

€23.48

Sold out

FRR32-EU-AS-NX

Corrosion-resistant Euroroller FRR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, eccentric, with NBR seals type RS on both sides, Nadella

€191.15

Details

Sold out

GCR30-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€98.90

Details

Sold out

GCR32-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€124.90

Details

Sold out

R067112076

Super linear bushing KBA-O-20-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€42.23

Details

B7201-C-T-P4S-UL

Super precision angular contact ball bearing B72..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€90.50

DSAL12-T/K M12x1,25

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Sold out

R073202000

Super linear bushing KBH-20 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€58.80

Details

Sold out

LM20-UU-S

Closed standard ball bushing (linear ball bearing), standard, plastic cage, stainless steel balls, seals on both sides, Samick

€15.00

Details

BRTM12-00-501

Heavy-duty rod end BRTM.. with integral self-aligning roller bearing, series K, male right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€85.31

Sold out

R074122530

Standard linear bushing KBMFT-25-DD-NR, tandem with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€416.91

Details