EMN12-20-501

€22.79

Ready for dispatch within 2-3 working days: 9

Product number: 1002635

Manufacturer: Durbal

Weight: 0.09 kg

Product information "EMN12-20-501"

Heavy-duty rod end EMN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, male right hand thread, zinc plated, relubricatable, Durbal

Bore diameter:	12
Outer diameter:	32
Width:	10
Height:	70
Thread type:	male thread right
Thread size:	M12
Material:	standard

Alternative articles to "EMN12-20-501"*

EA12
GAR12-DO
SA12E

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Heavy-Duty Rod Ends EMN - Classic Line - Durbal
Rod Ends & Spherical-Plain Bearings - Durbal - Product Catalogue

Similar products

PAW18-P200 - 100x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€208.51

Sold out

RNAO20X32X12-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€20.70

Details

Sold out

BBE20-A-UU

Closed standard ball bushing (linear ball bearing), standard, steel cage, seals on both sides, SNR

€27.89

Details

Sold out

KRE32-PP-A-NMT

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€62.39

Details

Sold out

FG1232-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, without seals, Nadella

€55.79

Details

Sold out

GCL32-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€87.43

Details

Sold out

52202

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€29.12

Details

Sold out

FRL32-EU

Floating guide roller FRL..-EU, with double row angular contact ball bearing, light convex raceway side, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€73.66

Details

Sold out

DSIL12-T/K M12x1,25

Standard rod end DSIL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Details

Sold out

FRLR32-EU-NX

Corrosion-resistant floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€162.91

Details

Sold out

R067025340

Super linear bushing KBA-20-DD-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€41.29

Details

Sold out

R067122076

Super linear bushing KBA-O-20-DD with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€43.37

Details

Sold out

ET2432

Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

Price on request

Sold out

BRTM12-60-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€182.63

Details

Sold out

R067312040

Super linear bushing KBB-O-20-D without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€42.23

Details