IR90X105X35-XL

Bore diameter:	90
Outer diameter:	105
Width:	35
Material:	standard

51311

Axial deep groove ball bearing 513.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€60.63

PAP100115-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€18,228.60

PAP100115-P11 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,879.28

PAP10060-P20 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€740.75

PAP10060-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,988.22

Sold out

R151274013

Single nut with flange, FEM-E-S 80X10RX6,5-6, Ball screw assemblies, sealed, Rexroth

Price on request

Sold out

LRE23

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€193.89

Details

Sold out

RNA3065

Full complement needle roller bearing RNA3.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€289.18

Details

SL182915-B-XL

Single row cylindrical roller bearing SL1829.., with full complement roller set, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, INA

€109.15

NK85/25-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€63.40

51214

Axial deep groove ball bearing 512.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€46.46

GS89311

Housing locating washer GS893.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€83.56

Sold out

AR1455105

Axial roller bearing with cylindrical rollers AR.., heavy series, double-row roller cage held on a heavy hardened raceway plate CPR.., Nadella

Price on request

PAP10060-P11 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€5,901.46

PAP10050-P200 - 5x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€271.60

Product information "IR90X105X35-XL"