KB40-PP-RROC-AS

€84.85

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1003059

Manufacturer: INA

Weight: 0.6 kg

Product information "KB40-PP-RROC-AS"

Corrosion-resistant linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

Bore diameter:	40
Outer diameter:	62
Lenght:	80
Sealing:	seals on both sides
Material:	standard

Similar products

Sold out

R060204030

Standard linear bushing KBM-40-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€269.12

Details

Sold out

R074054000

Standard linear bushing KBMF-40-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€186.49

Details

Sold out

EM25-60-502

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male left hand thread, maintenance-free, Durbal

Price on request

63007-A-2RSR-C3

Single row deep groove ball bearing 630.., radial, with steel cage and contact seals on both sides, FAG

€16.87

6206-2RSR

Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG

€5.29

PAW38-P14 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€5,079.75

LF14

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€121.47

2305-TVH-C3

Self-aligning ball bearing 23.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€29.57

HCS7007-C-T-P4S-UL

High-speed spindle bearing HCS70., with ceramic balls, contact angle α = 15°, universal pairing, sealed on both sides, FAG

€241.95

PAW38-P200 - 1x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request

NATV30-PP

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

€44.68

3305-BD-XL

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€39.00

7206-B-XL-TVP-P5-UL

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€52.98

NUTR2562-X

Yoke type track roller with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€50.37

NU2206-E-XL-TVP2

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€30.01