KH20-PP

Bore diameter:	20
Outer diameter:	28
Lenght:	30
Sealing:	seals on both sides
Material:	standard

PAP2525-P11 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€4,170.08

51201

Axial deep groove ball bearing 512.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€9.57

Sold out

DLF2216

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€19.48

Details

Sold out

BRTF10-30-501

Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, full complement design, galvanized, with shields on both sides, relubricatable, Durbal

€97.44

Details

PAP2515-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€193.32

PAP2525-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,004.35

IR20X28X20-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€6.52

Sold out

BEFN10-81-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, fine female left hand thread, relubricatable, Durbal

€32.58

Details

PAF25115-P180 - 50x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€140.74

R065822040

Compact ball bushing KBC-20-DD, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€14.24

PAP2515-P200 - 5000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€9,537.45

Sold out

PFD28.10

Double cam follower PFD.. with reinforced bolt, with convex outer ring, for assembling on double contact cam movements, incl. lock washer and nut, Nadella

€142.27

Details

6001-C-2HRS-C3

Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG

€2.49

BEM10-60-501

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, maintenance-free, Durbal

€29.31

PAP2540-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€187.61

Product information "KH20-PP"