KN20-B

€26.57

Ready for dispatch within 3-5 working days: 7

Product number: 1003275

Manufacturer: INA

Weight: 0.06 kg

Product information "KN20-B"

Linear ball bearing KN.. for shaft guidance systems, lightweight range, closed design, plastic cage with inserted raceway plates, angle-adjustable, relubricatable, without seals, INA

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

KBS20

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€32.76

Sold out

GC32-EEM-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella

€95.75

Details

3201-2RS

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with steel cage, seals on both sides, INA

€23.48

Sold out

FRL32-EU-NX

Corrosion-resistant floating guide roller FRL..-EU, with double row angular contact ball bearing, light convex raceway side, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€155.55

Details

Sold out

GCR32-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€107.16

Details

Sold out

GCR32-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€124.90

Details

Sold out

R067212040

Super linear bushing KBB-20-D without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€40.29

Details

B7201-C-T-P4S-UL

Super precision angular contact ball bearing B72..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€90.50

R067002000

Super linear bushing KBA-20 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€39.35

Sold out

R073322040

Super linear bushing KBH-O-20-DD for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€69.98

Details

Sold out

LM20-UU-S

Closed standard ball bushing (linear ball bearing), standard, plastic cage, stainless steel balls, seals on both sides, Samick

€15.00

Details

Sold out

DGIHN-K 12 LO

Hydraulic rod end DGIHN-K..-LO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-LO, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

Sold out

R074222030

Standard linear bushing KBMM-20-DD-NR, tandem with centered square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€402.72

Details

6002-2RSR-C3

Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG

€2.67

BRTF12-00-501

Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€85.31