KR80-PP-A

Bore diameter:	30
Outer diameter:	80
Lenght:	100
Sealing:	seals on both sides
Thread size:	M30x1,5
Material:	standard

Sold out

NUP307-E-XL-M1

Single row cylindrical roller bearing NUP3.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€96.63

Details

Sold out

7307-B-XL-TVP-UL

Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€34.01

Details

PAP7580-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€5,533.03

Sold out

UC208-G2

Bearing insert for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

€17.92

Details

NJ2208-E-XL-M1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€84.11

ZARF3080-TV-A

Needle roller axial cylindrical roller bearing ZARF, combined axial radial high-precision bearings for screw drives, light series, double direction, with locating holes, INA

€547.66

PAP7550-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€651.06

7010-U-C-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, NTN

€123.06

NJ307-E-XL-M1A-C3

Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€94.67

DRS2080

Seal carrier assy DRS for screwing onto ZARF(L) bearings, complete seal kit consisting of: sealing flange, NBR rotary shaft seal, flange seal and fastening screws, heavy series, INA

€151.10

PAP7580-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€33.71

Sold out

N208-E

Single row cylindrical roller bearing N2.., outer ring without ribs, inner ring with two ribs, steel cage, CMT Line

€23.25

Details

NU208-E-XL-M1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€70.97

7307-B-XL-MP-UA

Angular contact ball bearing 73..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€56.15

PAP7560-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€970.84

Product information "KR80-PP-A"