KRVE90-PP-A

€206.20

Ready for dispatch within 3-5 working days: 11

Product number: 1047508

Manufacturer: INA

EAN: 4012802368574

Weight: 2.27 kg

Product information "KRVE90-PP-A"

Stud type track roller KRVE.. with eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

Bore diameter:	30
Outer diameter:	90
Lenght:	100
Sealing:	seals on both sides
Thread size:	M30x1,5
Material:	standard

Similar products

21308-E1-XL-K-C3

Spherical roller bearing, double row, 213..-E1-K series, tapered bore, with steel cage, groove and lubrication holes on outer ring, FAG

€57.73

N308-E-XL-M1-C3

Single row cylindrical roller bearing N3.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€110.32

Sold out

GCRL80-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

WS81113

Shaft locating washer WS811.., thrust bearing washers, internally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€18.09

NNF5011-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€112.31

Sold out

NUKR90-A-NMT

Stud type track roller NUKR.., solid roller pin, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, incl. fixing nut, INA

€169.23

Details

PAP85100-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€96,807.26

HCS71913-C-T-P4S-UL

High-speed spindle bearing HCS719.., with ceramic balls, contact angle α = 15°, universal pairing, sealed on both sides, FAG

€452.02

NJ2308-E-XL-TVP2

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€63.38

KMT12

Precision shaft nut with three radial locking pins, APA

€31.50

QJ210-XL-MPA

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€63.34

ASNU40 - USNU40

Built-in roller freewheel USNU.., dimensions according to ball bearing 63.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€211.09

6210

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€10.28

LRE21

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€186.66

NK73/35-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€59.51