LR20

€122.04

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1029987

Manufacturer: Sfero / Nadella

Weight: 0.27 kg

Product information "LR20"

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

Outer diameter:	85
Width:	15
Thread size:	M65x2
Material:	standard

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Adjusting Nuts and Threated Rings – Sfero-Nadella

Similar products

GLE45-XL-KRR-B

Radial insert ball bearing GLE.., non-locating, with drive slot in inner ring to prevent rotation, spherical outside surface of outer ring, compensates for misalignment, sealed on both sides, with steel cage, relubricatable, INA

€53.36

Sold out

AH212

Withdrawal sleeve, AH2.. series, roller bearing accessories for installation and removal, for mounting roller bearings with tapered bore on cylindrical seat of stepped metric shaft, BGL

€18.38

Details

Sold out

GCR85-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€441.16

Details

Sold out

22209-EA-B33-C3

Spherical roller bearing, double row, groove and lubrication holes on outer ring, main dimensions to DIN 635-2, NRB

€27.59

Details

Sold out

FGUL4585-MM

Full complement single row track roller FGUL.. without pin, light series, with cylindrical outer ring, non-separable, metal shielded, Nadella

Price on request

6209-2Z-C3

Single row deep groove ball bearing 62.., radial, with steel cage and sheet steel shields on both sides, FAG

€10.00

PAP8040-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€460.62

HSS71912-E-T-P4S-UL

High-speed spindle bearing HSS719.., with size-reduced steel balls, contact angle α = 25°, universal pairing, sealed on both sides, FAG

€220.57

PAP80100-P11 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€38,995.13

7209-B-XL-MP-UA

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€57.59

PAP8040-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€2,304.22

RNA6912-ZW-XL

Needle roller bearing RNA69..-ZW, double row, outer ring with two ribs, without inner ring, steel cage, open design, INA

€85.06

PAP8055-P200 - 2500x

€57,047.74

STO45

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€103.31

PAP8040-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€36,056.96