NA22/6-2RSR

€16.92

Ready for dispatch within 3-5 working days: 66

Product number: 1048023

Manufacturer: INA

EAN: 4012802713244

Weight: 0.02 kg

Product information "NA22/6-2RSR"

Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

Bore diameter:	6
Outer diameter:	19
Width:	12
Cage:	steel cage
Material:	standard

Similar products

3800-2RS

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€18.74

Sold out

R060001030

Standard linear bushing KBM-10-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, guide cage made of PA/POM, without sealing rings, ungreased, Rexroth

€43.85

Details

ZKLN0619-2Z-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, without fixing holes, gap seals on both sides, INA

€164.05

3800-2Z

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, INA

€17.98

Sold out

R067011040

Super linear bushing KBA-10-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€27.90

Details

Sold out

R060201030

Standard linear bushing KBM-10-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, guide cage made of PA/POM, with two integrated wiper seals, ungreased, Rexroth

€58.28

Details

ZKLFA0630-2Z

Double row axial angular contact ball bearing with flange, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA

€362.92

30/7-2RSR-HLC

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€19.60

CLK300 15x19

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€3.90

Sold out

GC19-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€64.24

Details

Sold out

KRE19-EE

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with screw driver slot, incl. clamping nut, Nadella

€48.55

Details

NKI9/12-XL

Needle roller bearing NKI.., light series, open single row design, ribs on outer ring, with inner ring, steel cage, INA

€10.48

K15X19X13-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€3.28

KR19

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€27.49

KRV19-PP-A

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€29.22