NATR10

€26.77

Ready for dispatch within 3-5 working days: 121

Product number: 1048183

Manufacturer: INA

EAN: 4012801176033

Weight: 0.06 kg

Product information "NATR10"

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, gap seals on both sides, INA

Bore diameter:	10
Outer diameter:	30
Width:	15
Cage:	steel cage
Material:	standard

Similar products

PAW16-P14 - 50x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€98.34

C208-SP-ZZ

Profiled guide roller C..-SP-ZZ without pin, double row ball bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€16.71

PAW16-P180 - 25x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€55.60

CLK250 20x30

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€11.58

FG1030-EEM-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, metal shielded, Nadella

€60.25

Sold out

GCR30-EE-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, with plastic seals, incl. lock washer and nut, Nadella

€109.87

Details

Sold out

B71903-C-T-P4S-UL

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, APA

€36.51

Details

KRV30-EE

Stud type track roller, with axial guidance, concentric, full complement needle roller set, sealed on both sides with plastic axial plain washers, NRB

€12.40

R066802030

Segmental linear bushing KBSE-20-NR, linear bushings, closed design with reinforced plastic housing, hardened steel segments und balls made of stainless steel, guide cage and retaining rings made of PA11, without wiper selas, without grease, Rexroth

€25.79

62200-A-2RSR-C3

Single row deep groove ball bearing 622.., radial, with steel cage and contact seals on both sides, FAG

€7.99

Sold out

7200-B-XL-JP-UO

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€26.23

Details

NK22/16-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€11.40

NA4903-RSR-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, seal on one side, INA

€22.00

NX20-Z-XL

Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for grease lubrication, INA

€32.83

IR25X30X26,5-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€7.75