NU208-E-XL-M1A-C3

Bore diameter:	40
Outer diameter:	80
Width:	18
Cage:	brass cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

6307-C-2Z

Single row deep groove ball bearing 63.., radial, with steel cage and sheet steel shields on both sides, FAG

€9.67

PAP7580-P200 - 500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€26,347.72

NU208-E-XL-TVP2

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€32.23

62307-A-2RSR

Single row deep groove ball bearing 623.., radial, with steel cage and contact seals on both sides, FAG

€31.08

PAP7550-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€651.06

N208-E-XL-M1

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€89.21

7307-B-XL-JP-UO

Angular contact ball bearing 73..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€43.26

PAP7560-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€970.84

KRE80-PP

Eccentric track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€121.45

N208-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€52.02

ZKLF3080-2RS-PE

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, less stringent bearing design, seals on both sides, INA

€297.26

NKIS50

Needle roller bearing of heavy series NKIS.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€47.16

NUP208-E-XL-TVP2

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with solid plastic cage, FAG

€40.30

7307-B-XL-MP

Angular contact ball bearing 73..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€46.67

PWTR40-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€73.91

Product information "NU208-E-XL-M1A-C3"