PAP2225-P180 - 25x | Cylindrical bushing Permaglide® PAP-P180

Bore diameter:	22
Outer diameter:	25
Lenght:	25
Material:	PERMAGLIDE® P180

PAP2215-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€78.75

CLK250 14x25

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€9.72

KM2

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€2.44

G17X25X3-C

Single-lip sealing ring G.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR-coated stiffening ring with a rubber shaft profile, INA

€2.36

Sold out

IR20X25X38,5-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€13.02

Details

PAP2220-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€48.00

PAP2220-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€3,288.19

PAP2215-P11 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€5,357.63

PAP2220-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€129.46

PAP2215-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,310.01

PFV25.10-NX

Corrosion-resistant ball bearing guide roller PFV.., version with "gothic arch" profile, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€169.36

R066801600

Segmental linear bushing KBSE-16, linear bushings, closed design with reinforced plastic housing, hardened steel segments, balls made of bearing steel, guide cage and retaining rings made of PA11, without wiper selas, without grease, Rexroth

€13.37

IR20X25X30-IS1-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€16.76

LR20X25X38,5

Inner ring LR... for needle roller bearings, cylindrical, made of hardened bearing steel, raceway ground, with chamfers on the end faces, without lubrication hole, INA

€18.24

PAP2230-P10 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€8,081.78

2225DP4
PG 222525 F
PCM 222525 E
EGB2225-E40
TFZ 2225

PAP2225-P180 - 25x

Product information "PAP2225-P180 - 25x"