PAP80100-P180 - 1x

€31.85

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1124775

Manufacturer: Permaglide

Weight: 0.502 kg

Product information "PAP80100-P180 - 1x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

Bore diameter:	80
Outer diameter:	85
Lenght:	100
Material:	PERMAGLIDE® P180

Alternative articles to "PAP80100-P180 - 1x"*

80100DP4
PG 8085100 F
PCM 8085100 E
EGB80100-E40
TFZ 80100

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

NKX70-Z-XL

Needle roller/axial ball bearing NKX..-Z, combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA

€167.23

51112

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€20.23

33110

Tapered roller bearing 331.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€37.38

LR208-X-2RS

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with cylindrical outer surface, with plastic cage, lip seals on both sides, INA

€69.99

Sold out

2209-K-TVH

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, FAG

€34.07

Details

LFE20

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€249.48

Sold out

QJ209-XL-MPA-T42A

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€65.05

Details

NUTR45

Yoke type track roller with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€71.29

Sold out

NJ209-E-XL-M1A-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€84.51

Details

R1131

Cylindrical roller bearing without inner ring, brass cage, special design, NTN

€74.89

NJ209-E-XL-JP1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€52.19

Sold out

FG4585-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€252.70

Details

GRAE45-XL-NPP-B

Radial insert ball bearing GRAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€35.90

B7209-E-T-P4S-UL

Super precision angular contact ball bearing B72..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€174.82

Sold out

GCR85-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€470.51

Details