PAP8060-P200 - 1000x | Cylindrical bushing Permaglide® PAP-P200

Bore diameter:	80
Outer diameter:	85
Lenght:	60
Material:	PERMAGLIDE® P200

KM13x1,5

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€4.58

PAP8040-P10 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€91.64

Sold out

NUP209-E-XL-M1

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€91.54

Details

CLK131 55x85

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

€38.26

PAP8040-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€941.44

Sold out

GCURL85

Full complement single row track roller GCURL.. with threaded stud, with cylindrical outer ring, eccentric, without seals, incl. lock washer and nut, Nadella

Price on request

NCF2912-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€61.09

PAP8055-P200 - 1x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€29.40

PWTR45-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€93.02

PAP8060-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€9,688.19

Sold out

33110-H

Tapered roller bearing 331.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€37.38

Details

Sold out

22209-EA-K-B33-C3

Spherical roller bearing, double row, tapered bore, groove and lubrication holes on outer ring, main dimensions to DIN 635-2, NRB

€27.59

Details

Sold out

FGL4585-EEM-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella

€287.14

Details

AM55

Precision locknut AM, for preloading bearings for screw drives, axially clampable with six segments, INA

€177.18

PAP8040-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€36,056.96

PM8060DX
PG 808560 A
PCM 808560 M
EGB8060-E50
POZ 8060

PAP8060-P200 - 1000x

Product information "PAP8060-P200 - 1000x"