PAP8060-P200 - 50x

€1,482.75

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1124820

Weight: 14.75 kg

Product information "PAP8060-P200 - 50x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	80
Outer diameter:	85
Lenght:	60
Material:	PERMAGLIDE® P200

Alternative articles to "PAP8060-P200 - 50x"*

PM8060DX
PG 808560 A
PCM 808560 M
EGB8060-E50
POZ 8060

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

IR75X85X30-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€31.74

IR75X85X25-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€25.94

LS6085

Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA

€9.24

AS6085

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€2.06

AXK6085-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€6.01

6209-2RSR-C3

Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG

€11.29

6209

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€8.69

Sold out

SL024912-A-C3

Double row cylindrical roller bearing SL0249.. with full complement, non-locating bearing, three fixed ribs on inner ring, outer ring without ribs, locking ring between rows of rolling elements, INA

€114.08

Details

PWTR45-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€118.98

Sold out

SL184912-A-C3

Double row cylindrical roller bearing SL1849.., support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, INA

€162.97

Details

Sold out

NJ2209-E-XL-MPAX-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with rib-guided single-piece brass cage, FAG

€101.32

Details

6209-C3

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€8.69

3209-BD-XL-2HRS-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and contact seals on both sides, FAG

€66.35

Sold out

3209-BD-XL-2HRS

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and contact seals on both sides, FAG

€66.35

Details

6209-C-2HRS-C3

Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG

€11.29