PAP8560-P10 - 100x

€2,398.60

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1122233

EAN: 4028977659539

Weight: 31.9 kg

Product information "PAP8560-P10 - 100x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Bore diameter:	85
Outer diameter:	90
Lenght:	60
Material:	PERMAGLIDE® P10

Alternative articles to "PAP8560-P10 - 100x"*

8560DU

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

CLK132 60x90

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€29.92

N210-E-XL-TVP2-C3

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€57.91

IR80X90X25-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€28.41

GFR25/24 - GL25/24

Roller type freewheel GL.. (basic unit to be mounted with covers), two ball bearings of series 160.. supported, one keyway on the inner ring, threated holes on outer ring, incl. flat seals, CTS

Price on request

NU406-XL-M1A-C3

Single row cylindrical roller bearing NU4.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€105.63

NUKR90-A

Stud type track roller NUKR.., solid roller pin, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€169.23

Sold out

FGU4090-MM

Full complement single row track roller FGU.. without pin, heavy series, with extra thick-walled optimized profiled outer ring, non-separable, metal shielded, Nadella

€423.13

Details

Sold out

NU2210-E-XL-JP3-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with steel cage, FAG

€59.07

Details

PWTR50-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€127.83

Sold out

RKXR90-C-NX

Corrosion-resistant guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€831.17

Details

NJ308-E-XL-TVP2

Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€46.87

30210-A>A

Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€25.75

Sold out

ARNBT2590

Combined precision roller bearing ARNBT.., radial bearing part: needle roller bearing with cage, lateral: axial cylindrical roller bearings with thrust washers, adjustable axial preload, with bolt-on holes, Nadella

Price on request

GE50-XL-KRR-B

Radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€42.67

6011

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€10.14