All products

ET1824

Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

€8.61

C312-INOX-2RS

Corrosion-resistant profiled guide roller C..-2RS with pin, double row bearing, concentric, seals on both sides, incl. lock washer and nuts, CTS

€51.28

E208-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€24.99

C208-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€24.99

TS2-6212-A-CS56-PX6

Single row deep groove ball bearing, radial, special design for motors, NTN

€100.10

6312-CS56-PX3-V30

Single row deep groove ball bearing, radial, special design for motors, NTN

€114.62

C312-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€31.86

CC210-ZZ

Cylindrical guide roller CC..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€29.14

E312-INOX-2RS

Corrosion-resistant profiled guide roller E..-2RS with pin, double row bearing, усcentric, seals on both sides, incl. lock washer and nuts, CTS

€51.28

PFV25.10

Ball bearing guide roller PFV.., version with "gothic arch" profile, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€63.71

E312-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€31.86

TS2-6210-CS46-PX8-V22

Single row deep groove ball bearing, radial, special design for motors, NTN

€65.25

6310-CS46-PX2-V37

Single row deep groove ball bearing, radial, special design for motors, NTN

€70.22

BRF06-00-502

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female left hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€40.27

C210-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€29.14

C106-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€21.89

KWVE25-B-V1-G3

Runner block KWVE25-B.., Recirculating ball bearing and guideway assemblies, four-rows (O-arrangement), flange design in standard lenght, full complement, with basic lubrication, INA

€69.27

BRM10-00-501

Heavy-duty rod end BRM.. with integral self-aligning ball bearing, series K, male right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€44.70

TS2-6208-CS40-PX11-V45

Single row deep groove ball bearing, radial, special design for motors, NTN

€68.72

DSI15-ES-2RS

Standard rod end DSI..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female right hand thread, zinc plated, with lip seals on both sides, relubricatable, Durbal

€10.96

DGE08-FW

Radial spherical-plain bearing DGE..-FW, sliding combination steel-steel, lined with bronze-PTFE-composite, series G, maintenance-free, Durbal

€6.45

BMW25-A-G3-V1-R1-CN-S99-LN

Linear runner block BMW25-A.., Recirculating ball bearing and guideway assemblies, flange design in standard lenght, four-rows (O-arrangement), full complement, with cross and longitudinal wipers, oiled, Schneeberger

€91.65

R067021240

Super linear bushing KBA-12-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€30.14

R166289420

Runner block SS KWD-020-SKS-C0-N-1, Recirculating ball bearing and guideway assemblies, short block design, four rows in O-arrangement, with integrated complete sealing, Rexroth

€56.73

All products

Filter products