R060102010

€35.35

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113761

Manufacturer: Rexroth

Weight: 0.097 kg

Product information "R060102010"

Standard linear bushing KBM-20-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with wiper seal on one side, ungreased, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

BEMN12-80-501

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, relubricatable, Durbal

€40.56

Sold out

R074052000

Standard linear bushing KBMF-20-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€61.53

Details

6201-C>V

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€1.84

HCS7002-E-T-P4S-UL

High-speed spindle bearing HCS70., with ceramic balls, contact angle α = 25°, universal pairing, sealed on both sides, FAG

€200.33

Sold out

FG1232-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€67.12

Details

Sold out

BRF12-61-502

Heavy-duty rod end BRF.. in stainless steel, with integral self-aligning ball bearing, series K, fine female left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€148.08

Details

Sold out

R067022076

Super linear bushing KBA-20-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€41.29

Details

Sold out

MB3A

Securing plate MB..A, reinforced design, to secure metric lock nuts KM.. and HM.. on shafts or adapter sleeves by means of tab bending, according to DIN 5406, made of steel, BGL

€0.68

Details

NATR12

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€23.03

Sold out

BRTM12-60-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€182.63

Details

Sold out

FR32

Guide roller FR.., special rollers, two separate modified ball bearings, concentric, sealed, incl. lock washer and nuts, Nadella

Price on request

FRN32-EI-NX

Corrosion-resistant guide roller FRN..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€247.55

EMN12-20-502

Heavy-duty rod end EMN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, male left hand thread, zinc plated, relubricatable, Durbal

€22.79

R061202010

Standard linear bushing KBM-E-20-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€39.48

3002-2Z

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, INA

€19.32