R060202010

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Sold out

HK2516-AS1-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, with lubrication hole, INA

€7.17

Details

Sold out

FR32-EU-AZ-NX

Corrosion-resistant Euroroller FR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, concentric, with NBR seals type RS on both sides, Nadella

€163.12

Details

Sold out

R067012040

Super linear bushing KBA-20-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€40.30

Details

Sold out

FRLR32-EU

Floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€73.66

Details

Sold out

R067112040

Super linear bushing KBA-O-20-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€42.23

Details

Sold out

FRR32-AZ

Guide roller FRR..AZ, special rollers, pin with through-hole in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

Sold out

R060002056

Standard linear bushing KBM-20, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, without sealing rings, ungreased, Rexroth

€33.20

Details

Sold out

FGL1232-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€58.64

Details

Sold out

R073222070

Super linear bushing KBH-20-DD for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€66.35

Details

Sold out

R073012040

Super linear bushing KBSH-20-D for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€106.31

Details

Sold out

R074152000

Standard linear bushing KBMFT-20-DD, tandem with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€149.43

Details

PAP2830-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,240.10

Sold out

R061002000

Standard linear bushing KBM-E-20, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, without sealing rings, ungreased, Rexroth

€35.01

Details

PAP2820-P10 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€8,530.28

Sold out

DSIL12-T/K M12x1,25

Standard rod end DSIL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Details

Product information "R060202010"