Skip to main content Skip to search Skip to main navigation

R065801230

Product information "R065801230"

Compact ball bushing KBC-12-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth
Bore diameter: 12
Outer diameter: 19
Lenght: 28
Material: сorrosion-resistant
Skip product gallery

Similar products

Sold out
FRNR19
Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

Regular price: €103.74
NK12/12-XL
Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

Regular price: €7.70
HK1312-B
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA

Regular price: €3.13
NA22/6-X-2RSR
Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with cylindrical outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

Regular price: €18.65
KR19-X-SK-PP-A
Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

Regular price: €36.46
126-TVH
Self-aligning ball bearing 12.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

Regular price: €11.52
Sold out
R065801256
Compact ball bushing KBC-12, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

Regular price: €10.41
Sold out
R067001056
Super linear bushing KBA-10 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

Regular price: €27.09
DG08-PW
Radial spherical-plain bearing DG..-PW, sliding combination steel-brass, lined with bronze-PTFE-composite, series K, maintenance-free, Durbal

Regular price: €4.78
KR19-X
Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with screw driver slot, without seals, IDC

Regular price: €23.64
NATV6-PP
Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

Regular price: €14.00
FGL619-EE-SW
Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, with plastic seals, Nadella

Regular price: €49.26
FRNR19-EI
Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

Regular price: €92.60
61800-2RSR-HLC
Single row deep groove ball bearing 18.., radial, with steel cage and contact seals on both sides, FAG

Regular price: €8.09
NX10-Z-XL
Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for grease lubrication, INA

Regular price: €24.98