R065825140

€11.48

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113914

Manufacturer: Rexroth

Weight: 0.019 kg

Product information "R065825140"

Compact ball bushing KBC-12-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

Bore diameter:	12
Outer diameter:	19
Lenght:	28
Material:	standard

Similar products

Sold out

GCR19-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€87.19

Details

Sold out

R065805100

Compact ball bushing KBC-12-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, without wiper seals, without grease, Rexroth

€10.41

Details

Sold out

R065825144

eLINE ball bushing KBC-12-DD-RT-G, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, with grease, Rexroth

€11.48

Details

Sold out

R067221040

Super linear bushing KBB-10-DD without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€28.70

Details

KR19-PP

Track roller with solid roller stud, with cage-guided needles, outer ring with crowned profile R500, with screw driver slot, seals on both sides, IDC

€22.83

NATR6-X

Yoke type track roller with cylindrical outer ring, with inner ring and needle cage, without seals, IDC

€13.60

Sold out

FG619-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, without seals, Nadella

€42.65

Details

PFL19

Track roller PFL.., single row, with reinforced bolt, for high precision and load, cylindrical outer ring, incl. lock washer and nut, Nadella

€59.69

61800-HLC

Single row deep groove ball bearing 618.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€6.74

NKX10-Z-TV-XL

Needle roller/axial ball bearing NKX..-Z, combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA

€30.54

STO6-TV

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€15.03

KR19-X

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, INA

€30.26

KRV19-X-PP-A-NMT

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€35.06

Sold out

FGL619-EEM-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella

€51.72

Details

Sold out

R065815176

Compact ball bushing KBC-12-D-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, without grease, Rexroth

€10.91

Details