Super linear bushing KBH-60-D for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth
Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella
Four-point contact bearing QJ3.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG
Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
External clamping set (shrink disc) CLK603 - standard series, three-part design, backlash-free shaft-hub connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line
Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA
Corrosion-resistant floating guide roller FK.. with tapered roller bearing, inner ring with holes for fixing on the shaft, with Viton-seals (up to 120°C), Nadella