R073324040

€137.79

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114127

Manufacturer: Rexroth

Weight: 0.356 kg

Product information "R073324040"

Super linear bushing KBH-O-40-DD for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

Bore diameter:	40
Outer diameter:	62
Lenght:	80
Material:	standard

Similar products

NATR30

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, gap seals on both sides, INA

€52.33

CLK139 40x62

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€33.04

AY30-XL-NPP-B

Radial insert ball bearing AY.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, not relubricatable, INA

€17.81

NUTR30-A

Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€58.53

ASNU25 - USNU25

Built-in roller freewheel USNU.., dimensions according to ball bearing 63.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€122.77

206-XL-NPP-B

Self-aligning deep groove ball bearing 2..-NPP-B, radial insert ball bearing with spherical outside surface of the outer ring, cylindrical bore for fit, compensating for misalignment, sealed on both sides, with plastic cage, INA

€13.87

NUKRE62-X-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled cylindrical outer ring, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€135.05

Sold out

FG3062-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€159.06

Details

GE30-XL-KRR-B-FA125.5

Corrosion-resistant radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€29.58

STO30

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€41.00

Sold out

GC62-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€215.17

Details

E30-XL-KRR

Radial insert ball bearing E..-KRR, cylindrical outer ring, with eccentric locking collar for mounting on shaft, lip seals on both sides, with plastic cage, relubricatable, INA

€26.06

16007-A-C3

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€9.29

RNA3030

Full complement needle roller bearing RNA3.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€133.03

Sold out

GCUL62-MM

Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

€227.84

Details