RAE12-XL-NPP-B

€14.52

Ready for dispatch within 3-5 working days: 40

Product number: 1051017

Manufacturer: INA

EAN: 4012802800654

Weight: 0.13 kg

Product information "RAE12-XL-NPP-B"

Radial insert ball bearing RAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, not relubricatable, INA

Bore diameter:	12
Outer diameter:	40
Width:	19/28,6
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	standard

Similar products

B7203-C-T-P4S-UL

Super precision angular contact ball bearing B72..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€97.08

ROTEX 19 ST - MatNr: 020195100800

ROTEX 19 ST hub 1.0 Ø8H7 key DIN 6885/1-JS9 > component 1a - #020195100800, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

6203-C-2HRS

Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG

€2.88

ROTEX 19 SINT - MatNr: 020192102400

ROTEX 19 SINT hub 1.0 Ø24H7 key DIN 6885/1-JS9 > component 1a - #020192102400, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€14.32

R150221083

Single nut with flange, FEM-E-B 25X5RX3-4, Ball screw assemblies, sealed, Rexroth

€318.21

Sold out

R065803000

Compact ball bushing KBC-30, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€18.75

Details

ROTEX 19 ALU - MatNr: 020196001100

ROTEX 19 ALU hub 1.0 Ø11H7 key DIN 6885/1-JS9 > component 1 - #020196001100, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€14.56

Sold out

IR35X40X20,5-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€12.86

Details

DGIR15-UK

Standard rod end DGIR..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female right hand thread, zinc plated, maintenance-free, Durbal

€10.96

Sold out

GCUR40

Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, without seals, incl. lock washer and nut, Nadella

€174.12

Details

NATR17-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€38.59

DSIL15-ES

Standard rod end DSIL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female left hand thread, zinc plated, relubricatable, Durbal

€9.56

Sold out

R065813030

Compact ball bushing KBC-30-D-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€43.82

Details

PWKRE40-2RS-XL

Stud type track roller PWKRE.., solid roller pin with eccentric collar, thick-walled outer ring with centre rib and profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, lip seals on both sides, INA

€79.26

LRE8

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€111.75