ROTEX 38 ALU - MatNr: 020386003800 | KTR Rotex® Standard coupling component

Design:	Rotex® Standard
Size:	38
Bore diameter:	38
Outer diameter:	80
Material:	GD-AlSi12(Cu)

CLK350 48x80

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€39.02

GRAE40-XL-NPP-B-FA125.5

Corrosion-resistant radial insert ball bearing GRAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€37.63

PAP7540-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€2,573.61

RSTO40

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€60.54

ROTEX 24 ALU - MatNr: 020246001600

ROTEX 24 ALU hub 1.0 Ø16H7 key DIN 6885/1-JS9 > component 1 - #020246001600, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

CLK134 40x80

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€26.42

208-XL-KRR

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€43.48

PAP7540-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,348.04

KRV80-X-PP-A

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€146.33

ROTEX 38 GG - MatNr: 020383003800

ROTEX 38 GG hub 1.0 Ø38H7 key DIN 6885/1-JS9 > component 1 - #020383003800, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€47.60

S208 - CB208

Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS

Price on request

ROTEX 24 - MatNr: 020241000045

ROTEX 24 Spider 92 Sh-A =T-PUR®= orange - #020241000045, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€4.38

PAP7580-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€29,249.81

6208-C-C3

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€7.10

ROTEX 38 ST - MatNr: 020385003500

ROTEX 38 ST hub 1.0 Ø35H7 key DIN 6885/1-JS9 > component 1 - #020385003500, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€62.86

ROTEX 38 ALU - MatNr: 020386003800

Product information "ROTEX 38 ALU - MatNr: 020386003800"