3209-BD-XL-TVH-L285-C3

Bore diameter:	45
Outer diameter:	85
Width:	30,2
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Sold out

LR20

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€122.04

Details

Sold out

QJ209-XL-N2-MPA-T42F

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€67.81

Details

NUTR45-X

Yoke type track roller with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€78.40

N209-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€54.38

7912-U-AD-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 25°, universal design, NTN

€148.93

Sold out

NJ2209-E-XL-JP1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€64.31

Details

Sold out

FG4585-EEM-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, metal shielded, Nadella

€264.19

Details

GE45-XL-KRR-B

Radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€40.33

H213

Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL

€9.31

Sold out

GCU85-MM

Full complement single row track roller GCU.. with threaded stud, with profiled outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

€356.80

Details

Sold out

22209-EA-K-B33

Spherical roller bearing, double row, tapered bore, groove and lubrication holes on outer ring, main dimensions to DIN 635-2, NRB

€27.59

Details

PAP8040-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€34,734.38

6209-C-2Z

Single row deep groove ball bearing 62.., radial, with steel cage and sheet steel shields on both sides, FAG

€10.00

PAP8060-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€17,476.68

HSS71912-C-T-P4S-UL

High-speed spindle bearing HSS719.., with size-reduced steel balls, contact angle α = 15°, universal pairing, sealed on both sides, FAG

€220.57

Product information "3209-BD-XL-TVH-L285-C3"