HSS71912-C-T-P4S-UL

Bore diameter:	60
Outer diameter:	85
Width:	13
Preload:	light preload
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	standard

GAY45-XL-NPP-B

Radial insert ball bearing GAY.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€29.26

Sold out

NA1055

Full complement needle roller bearing NA1.., complete bearing, assembly of solid through-hardened outer ring RNA1.. with needle rollers set and BI1.. inner ring, with lubrication hole and groove, Nadella

€190.86

Details

209-XL-KRR

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€54.44

KMT11

Precision shaft nut KMT.., for locking of machine components on shafts, with three radial locking pins, metric right-hand thread, BGL

€37.00

Sold out

FGL4585-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€281.71

Details

SL182209-A-XL

Single row cylindrical roller bearing SL1822.., with full complement roller set, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, INA

€94.37

PAP8060-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€957.44

61813-2RSR-Y

Single row deep groove ball bearing 18.., radial, with brass cage and contact seals on both sides, FAG

€46.26

PAP80100-P11 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€92.17

7209-B-XL-TVP-UO

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€45.08

PAP8080-P200 - 500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€18,142.51

NKIS55-XL

Needle roller bearing NKIS.., heavy series, open single row design, ribs on outer ring, with inner ring, steel cage, INA

€66.39

PAP8060-P200 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€778.44

NUTR45-A

Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€91.25

PAP8060-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€531.21

Product information "HSS71912-C-T-P4S-UL"