51210

Bore diameter:	50
Outer diameter:	78
Height:	22
Cage:	steel cage
Material:	standard

DGIHR-K 35 DO

Hydraulic rod end DGIHR-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

K70X78X30-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€25.12

GS81210

Housing locating washer GS812.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€21.19

KSR16-L0-10-10-14-08

Roller chain idler sprocket unit KSR..-L0, chain guide and deflection unit for sleeve and roller chains, C10 sintered iron sprocket disc on sealed deep groove ball bearing with wide inner ring, INA

€24.10

PAW52-P14 - 10x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€54.03

61812-Y

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€34.31

89308-TV

Double row axial cylindrical roller bearing 893.., combination of roller and cage assembly K893.., housing locating washer GS893.. and shaft locating washer WS893.., single direction, with plastic cage, non-greased, INA

€117.22

52210

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€62.16

PAW52-P10 - 1x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

GM7078

Sprag type freewheel cage GM.. without rings, Built-In Freewheels, for installation between inner and outer ring of metric dimensions, CTS

€138.75

Sold out

RNAO60X78X40-ZW-ASR1-XL

Double row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, with lubrication hole, INA

Price on request

51308

Axial deep groove ball bearing 513.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€26.69

PAW52-P10 - 30x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€150.80

PAW52-P180 - 100x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€495.22

DGK35-SK

Hydraulic rod end DGK..-SK, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

Product information "51210"