52210

Bore diameter:	40
Outer diameter:	78
Height:	39
Cage:	steel cage
Material:	standard

GS81111

Housing locating washer GS811.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€14.55

DGIHR-K 35 DO

Hydraulic rod end DGIHR-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

PAW52-P14 - 10x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€54.03

AS5578

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€1.72

61812-Y

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€34.31

PAW52-P10 - 30x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€150.80

Sold out

RNAO60X78X40-ZW-ASR1-XL

Double row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, with lubrication hole, INA

Price on request

GS81210

Housing locating washer GS812.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€21.19

DGK35-SK

Hydraulic rod end DGK..-SK, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

PAW52-P14 - 30x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€150.08

52308

Axial deep groove ball bearing 523.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€78.99

61812-Y-C3

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€34.31

PAW52-P10 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€10,174.61

51111

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€18.18

Sold out

GS89308

Housing locating washer GS893.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€46.81

Details

Product information "52210"