BRTM16-90-502

€207.11

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1001856

Manufacturer: Durbal

Weight: 0.2 kg

Product information "BRTM16-90-502"

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

Bore diameter:	16
Outer diameter:	32
Width:	21
Height:	70
Sealing:	cover shields on both sides
Thread type:	male thread left
Thread size:	M16
Cage:	full-complement
Material:	сorrosion-resistant

Alternative articles to "BRTM16-90-502"*

KAL20203-ZZ-V-NR

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Heavy-Duty Rod Ends BRTM-NIRO-VR - Premium Line - Durbal
Rod Ends & Spherical-Plain Bearings - Durbal - Product Catalogue

Similar products

CLK300 28x32

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€4.10

BEFN16-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€64.98

3804-B-2RSR-TVH-HLC

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, FAG

€20.25

Sold out

BRTF16-60-501

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, female right hand thread, cage design, with shields on both sides, relubricatable, Durbal

€186.77

Details

FRN32

Special guide roller FRN.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€205.17

KS20-PP

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, closed design, angle-adjustable, seals on both sides, relubricatable, INA

€26.74

Sold out

R073112040

Super linear bushing KBSH-O-20-D for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€112.14

Details

Sold out

EM17-60-502

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male left hand thread, maintenance-free, Durbal

€69.93

Details

DSG16-PB

Spherical-plain bearing DSG..-PB, sliding combination steel stainless - brass , series K, relubricatable, Durbal

Price on request

AX41932

Axial needle roller bearing AX.., thick series, single-row axial needle roller cage with built-in thick washer, Nadella

€28.21

NATR12

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€23.03

Sold out

R067002056

Super linear bushing KBA-20 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€39.35

Details

WLT12-30-500

Heavy-duty spherical bearing WLT.. with integral self-aligning roller bearing, full complement design, with long-term greasing and shields on both sides, Durbal

€114.92

DSA16-T/K

Standard rod end DSA..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male right hand thread, zinc plated, maintenance-free, Durbal

€12.39

Sold out

KMP4

Shaft nut KMP.., for locking of machine components on shafts, with four slots on the circumference and integrated radial locking element, metric right-hand thread, BGL

€25.45

Details