R073112040

€112.14

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114076

Manufacturer: Rexroth

Weight: 0.16 kg

Product information "R073112040"

Super linear bushing KBSH-O-20-D for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

7201-B-XL-TVP-P5-UO

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€46.02

BRM12-60-502

Heavy-duty rod end BRM.. in stainless steel, with integral self-aligning ball bearing, series K, male left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€151.81

PAP2830-P200 - 1x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request

NKS20

Needle roller bearing NKS.., heavy series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€17.93

BEM12-60-501

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, maintenance-free, Durbal

€37.47

PAW18-P10 - 1000x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,200.23

PNA15/32-XL

Adjusting needle roller bearing PNA.., with inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€27.98

EF12-20-502

Heavy-duty rod end EF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, female left hand thread, galvanized, maintenance-free, Durbal

€19.11

PAW18-P200 - 2500x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,756.05

RNAO20X32X12

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€20.70

BEFN12-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€40.56

16002-A-2Z

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€6.45

KR32-X

Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, without seals, IDC

€32.82

KRV32-PP-A

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€41.57

KB20-PP-AS

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€36.05