CLK400 30x55

Bore diameter:	30
Outer diameter:	55
Width:	51
Thread size:	M6
T (Nm):	1345
F (kN):	88
Material:	standard

Sold out

NSW35-4-2RS-B

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with four prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€251.57

Details

NSW35-6-2Z-A

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with six prismatic roller bearings -2Z shielded in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€324.09

Sold out

DSA06-T/K-01

Standard rod end DSA..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, joint ball in stainless steel, series K, male right hand thread, zinc plated, maintenance-free, Durbal

Price on request

Sold out

GR6-100

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€81.75

Details

ULC35-0800

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€204.22

Sold out

NSD35-Y-3-2RS-A

NSD-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy),, for mounting parallel to the load direction - configuration A, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€402.13

Details

NNCF5006-V

Double row cylindrical roller bearing, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€70.09

Sold out

GR6-500

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€279.75

Details

ULC35-1440

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€366.70

NSDA43-5-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€340.81

E106-INOX-2RS

Corrosion-resistant profiled guide roller E..-2RS with pin, double row bearing, eccentric, seals on both sides, incl. lock washer and nuts, CTS

€35.22

Sold out

GR6-900

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€529.64

Details

ULC35-2080

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€516.56

NSDA43-5-2RS-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€386.01

CLK110 15x24

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€21.76

Ringfeder - RfN 7005
Bikon - Bikon 1012
Tollok - TLK 400 - 450
KTR - KTR 400
Ringspann - RLK 402

Product information "CLK400 30x55"