ULC35-0800

Size:	35
Width:	35
Height:	16
Lenght:	800
Thread size:	M6
Material:	standard

ULV35-1120

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€285.71

TLC35-2320

Fixed bearing rail TLC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€566.47

ULV35-1440

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€366.79

TLC35-2960

Fixed bearing rail TLC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€722.41

ULV35-2640

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€644.60

ULV35-1280

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€326.03

ULV35-2560

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€624.95

Sold out

KRE16-PP-A-NMT

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€40.52

Details

Sold out

NSW35-N-4-2RS-B

NSW-Slider, Compact Rail, robust design, nickel-plated steel body with four prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€452.64

Details

Sold out

NSW35-6-2RS-B

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with six prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€367.69

Details

Sold out

GR6-250

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€139.30

Details

Sold out

NSD35-Y-5-2RS-A

NSD-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy),, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€615.18

Details

Sold out

GR6-175

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€107.36

Details

NSDA35-3-2RS-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€223.57

GR6-400-D-AA6-23

Linear unit GR6..-AA6.., cross roller guideways, two 400mm long guide rails and roller cage made of steel sheet with 23 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€413.60

Product information "ULC35-0800"