H310

Bore diameter:	45
Outer diameter:	70
Lenght:	42
Thread size:	M50x1,5
Material:	standard

BEFN30-21-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, fine female left hand thread, zinc plated, relubricatable, Durbal

€113.69

Sold out

LRE16

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€158.31

Details

Sold out

AH2309

Withdrawal sleeve, AH2.. series, roller bearing accessories for installation and removal, for mounting roller bearings with tapered bore on cylindrical seat of stepped metric shaft, BGL

€12.33

Details

AM50

Precision locknut AM, for preloading bearings for screw drives, axially clampable with six segments, INA

€132.21

GS81110

Housing locating washer GS811.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€11.26

PAP6550-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€10,774.34

PAP6570-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€17.99

PAP6550-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€12.87

PAP6550-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€25,478.70

PAP6550-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€605.45

DPOSL30

Standard rod end DPOSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€49.84

BRTF30-30-501

Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, full complement design, galvanized, with shields on both sides, relubricatable, Durbal

€276.17

WLT30-30-500

Heavy-duty spherical bearing WLT.. with integral self-aligning roller bearing, full complement design, with long-term greasing and shields on both sides, Durbal

€360.49

BEF30-61-502

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, fine female left hand thread, maintenance-free, Durbal

€186.77

Sold out

BEMN30-80-501

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, relubricatable, Durbal

€202.97

Details

Product information "H310"