LRE16
Product information "LRE16"
| Outer diameter: | 65 |
|---|---|
| Width: | 12 |
| Thread size: | M50x1,5 |
| Material: | standard |
Similar products
Product number:
1030014
Manufacturer:
Sfero / Nadella
Weight:
0.13 kg
Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella
We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.
Skip product gallery
DGIHO-K 25 DO
Hydraulic rod end DGIHO-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal
Price on request
DGF30-DO
Hydraulic rod end DGF..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with square welding end, sliding pair steel-steel, relubricatable, Durbal
Price on request
Sold out
RNAO50X65X40-ZW-ASR1-XL
Double row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, with lubrication hole, INA
Price on request
Sold out
DIST-FS52
Spacer ring DIST.. for FS/FSH/FSR/FSX guide rails, for mounting between guide rail and mounting surface, anodized aluminium version, without screw, Nadella
Price on request
PAP6040-P20 - 1x
Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®
Price on request
AS4565
Regular price:
€1.32
Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA
KM0
Regular price:
€2.44
Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL
KM9
Regular price:
€2.95
Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL
KM10
Regular price:
€3.08
Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL
AXK4565-A/0-10
Regular price:
€3.76
Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA
LS4565
Regular price:
€5.73
Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA
H209
Regular price:
€6.45
Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL
H309
Regular price:
€6.45
Adapter sleeve H3.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL