NATR8-X-PP-A

€22.87

Ready for dispatch within 3-5 working days: 655

Product number: 1048225

Manufacturer: INA

EAN: 4012802428131

Weight: 0.04 kg

Product information "NATR8-X-PP-A"

Yoke type track roller NATR.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

Bore diameter:	8
Outer diameter:	24
Width:	15
Cage:	steel cage
Material:	standard

Similar products

Sold out

FG82415-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€53.87

Details

RCL24.06

Guide roller RCL.. with double row angular contact ball bearing, concentric, with ZZ shields on both sides, incl. lock washer and nut, Nadella

€45.89

B71901-C-T-P4S-UL

Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€77.75

NKIA5901-XL

Needle roller angular contact ball bearing NKIA.., combined axial radial bearings, with one-piece inner ring, single direction axial component, INA

€22.90

RNA4901-2RSR-XL

Needle roller bearing RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, seals on both sides, INA

€18.17

HK1816-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA

€3.44

RNAO16X24X13

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€12.15

3802-B-2RSR-TVH-HLC

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, FAG

€18.92

HK1814-RS-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on one side, with steel cage, without lubrication hole, INA

€4.56

Sold out

R065811440

Compact ball bushing KBC-14-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€11.47

Details

DGIL08-UK

Standard rod end DGIL..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female left hand thread, zinc plated, maintenance-free, Durbal

€6.37

PAW12-P10 - 50x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€45.78

PM06-01-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male left hand thread, with shields on both sides, relubricatable, Durbal

€53.85

PAW12-P200 - 250x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€50.72

BEFN08-20-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€18.82