B71901-C-T-P4S-UL

€77.75

Ready for dispatch within 3-5 working days: 11

Product number: 1043994

Manufacturer: FAG

EAN: 4012801167543

Weight: 0.02 kg

Product information "B71901-C-T-P4S-UL"

Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

Bore diameter:	12
Outer diameter:	24
Width:	6
Cage:	polyamide, hard fabric
Material:	standard

Alternative articles to "B71901-C-T-P4S-UL"*

1015337 - 7901-U-C-G-GN-P42 - NTN
71901 CDGA/P4A - SKF
7901 CTRSULP3 - NSK

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

PAW12-P10 - 100x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€83.99

PM06-00-501

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male right hand thread, with shields on both sides, relubricatable, Durbal

€53.85

PAW12-P200 - 2500x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€2,011.43

BEMN08-80-501

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, relubricatable, Durbal

€28.85

Sold out

RNA4901

Needle roller bearing of series RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, IDC

Price on request

DL1816

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€12.00

Sold out

GCRL24-EE-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

Sold out

FG82415-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, without seals, Nadella

€48.98

Details

Sold out

ZKLFA0640-2Z

Double row axial angular contact ball bearing with flange, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA

€390.33

Details

Sold out

NA4901-RSR-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, seal on one side, INA

€19.09

Details

Sold out

IR20X24X20-XL-C3

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€5.21

Details

NATV8-X-PP-A

Yoke type track roller NATV.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring, full complement, three-stage sealing on both sides, INA

€22.87

609-HLN

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€1.88

Sold out

HK1816-AS1-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, with lubrication hole, INA

€4.13

Details

Sold out

R065815276

Compact ball bushing KBC-16-D-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, without grease, Rexroth

€12.46

Details