PAP5560-P180 - 100x | Cylindrical bushing Permaglide® PAP-P180

Bore diameter:	55
Outer diameter:	60
Lenght:	60
Material:	PERMAGLIDE® P180

IR55X60X25-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€16.59

AXK4060-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€3.23

PAP5560-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€17,911.73

PAP5540-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€9,384.18

PAP5560-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,872.02

BEM25-60-502

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male left hand thread, maintenance-free, Durbal

€138.05

Sold out

LRP35.150

Adjusting nut LRP.., wide type, spring nuts for precise adjustment, heavy-duty radial locking, clamping system with two clamping screw on each of two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€234.20

Details

CLK250L 50x60

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€26.56

SL183007-A-XL

Single row cylindrical roller bearing SL1830.., with full complement roller set, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, INA

€51.54

IR55X60X25-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€13.69

WS81108

Shaft locating washer WS811.., thrust bearing washers, internally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€9.27

PAP5560-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€400.56

PAP5540-P11 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€29.05

PAP5540-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€15,434.74

DPHS25

Standard rod end DPHS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal

€32.98

5560DP4
PG 556060 F
PCM 556060 E
EGB5560-E40
TFZ 5560

PAP5560-P180 - 100x

Product information "PAP5560-P180 - 100x"