CLK250L 50x60

Bore diameter:	50
Outer diameter:	60
Width:	28
Lenght:	46
T (Nm):	930
F (kN):	44
Material:	standard

PAP5540-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€3,159.98

PAP5540-P200 - 500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,787.93

PAP5540-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€6,365.00

DPHSL25

Standard rod end DPHSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€32.98

Sold out

BEFN25-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€150.17

Details

Sold out

PFVR60

Ball bearing guide roller PFVR.., version with 120° running groove, flat raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€113.59

Details

IR50X60X20-IS1-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€14.39

LS4060

Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA

€5.08

PAP5540-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€744.32

PAP5540-P11 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€599.92

PAP5540-P20 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€383.47

PAP5540-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,280.88

DSI25-T/K

Standard rod end DSI..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female right hand thread, zinc plated, maintenance-free, Durbal

€32.98

Sold out

BEMN25-80-501

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, relubricatable, Durbal

€150.17

Details

Sold out

DIST-FS47

Spacer ring DIST.. for FS/FSH/FSR/FSX guide rails, for mounting between guide rail and mounting surface, anodized aluminium version, without screw, Nadella

Price on request

Bikon - Bikon 5500 S
Tollok - TLK 250 L
KTR - KTR 125.1
Ringspann - RLK 250 L

Product information "CLK250L 50x60"