PAP7040-P10 - 2500x

€27,190.31

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1120480

EAN: 4028977659188

Weight: 440 kg

Product information "PAP7040-P10 - 2500x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Bore diameter:	70
Outer diameter:	75
Lenght:	40
Material:	PERMAGLIDE® P10

Alternative articles to "PAP7040-P10 - 2500x"*

7040DU

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

B7009-E-T-P4S-UL

Super precision angular contact ball bearing B70..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€142.72

ZM55

Precision lock nut ZM.., light series, for preloading bearings for screw drives, with two radially placed clamping pins, BGL

€33.56

6009-2Z-C3

Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

€7.87

ZARN4075-L-TV-A

Needle roller axial cylindrical roller bearing ZARN-L with long shaft locating washer, combined axial radial high-precision bearings for screw drives, light series, double direction, without locating holes, INA

€658.68

6009-C3

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€6.84

Sold out

KBS50-P

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, one side sealed, INA

€103.58

Details

Sold out

R067025740

Super linear bushing KBA-50-DD-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€151.99

Details

Sold out

R073315040

Super linear bushing KBH-O-50-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€211.16

Details

PAP7040-P10 - 100x

€1,340.20

Sold out

R150251086

Single nut with flange, FEM-E-C 50X5RX3,5-5, Ball screw assemblies, sealed, Rexroth

€588.59

Details

PAP7040-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€14,908.73

DGE50-HO-2RS

Radial spherical-plain bearing DGE..-HO, sliding combination steel-steel, phosphated, outer ring with single split, with lip seals on both sides, relubricatable, Durbal

€20.55

PAP7040-P20 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€1,171.15

NNF5009-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€85.09

PAP7070-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€18,122.33